CrispAVR-200 is a simple low-cost Atmel AVR ISP programming adapter for the PC parallel port (LPT).

Connection

CrispAVR-200 is being attached to the parallel port of a PC and provides a flat cable with two ISP receptacles, which fit into the common 6 and 10 pin ISP headers. In contrast to many other low-cost ISP adapters it is not necessary to build some 6-to-10 pin or adapter when using CrispAVR-200 with a 6 pin ISP header.

Software Compatibility

CrispAVR-200 is STK200/300 compatible, hence most common ISP software which supports STK200/300 can be used. Well known programs are WinAVR, avrdude, uisp and PonyProg.

Supported AVR Devices

CrispAVR-200 is a simple adapter from PC parallel port to Atmels AVR ISP port, hence the supported AVR devices are given by the used software. Please refer to the above mentioned links. PonyProg for example also supports serial EEPROMs etc.

CrispAVR-200 was designed for ~5V targets and does not support low-voltage targets (even though e.g. 3.3V mostly works...). For low-voltage target from 1.8V to 5.5V we recommend our CrispAVR-USB isp adapter with level shifters and USB interface.

Further Information

are available in the CrispAVR-200 Infosheet.

Product Documentation

• CrispAVR-200 Infosheet
  

Software

Command line tools for STK200 compatible ISP adapters:

• uisp - AVR-In-System Programmer
• AVRDUDE - AVR Downloader/UploaDEr

AVRDUDE is also included in the WinAVR C/C++ compiler toolset, as well as in our Portable_WinAVR distribution.