Products description
The M-3M1R by Rosahl is a compact flat-membrane dehumidifier module for volumes of up to 350 litres.
Operation Principle
Like all Rosahl dehumidifiers the M-3M1R is based on a solid-state polymer membrane. When supplied with a 3V DC voltage, moisture on one side is being decomposed into Hydrogen ions and Oxygen, the Hydrogen ions pass the membrane and recombine with air Oxygen to moisture again on the other side and get discharged.
Storage of 3D-Print Filament Spools
With an applicaple air volume of 350 liters the Rosahl M-3M1R membrane is suitable for storage of single filament spools e.g., in a 50 litre "Kreher® Waterproof Storage Box" with space for ~15 spools (alternatively Ikea "Samla" box, which has to be sealed separately). With pre-dried filament spools (especially spools made of cardboard contain quite high moisture) a continous storage at approx. 15% rH and less is achievable. We made a 3D printable mounting frame for the M-3M1R membrane plus USB-C power supply module, see the further product images. The 3D models can be downloaded on Printables.com. The diagrams show real measurements of the M-3M1R membrane in a 50l storage box and on a Bambu Lab AMS with outside mounting cover.
Note:
The achievable humidity level in a storage box or in the Bambu Lab AMS depends on both the sealing of the box as well as on the outside room humidity level. In regions of high room humidity it can be beneficial to "oversize" the membrane more to achieve the desired humidity level inside. If you are unsure about the suitability of a certain membrane for your particular storage box and/or application, please reach out to us in advance.
Power Supply
The Rosahl M-3M1R dehumidifer requires a 3V DC supply voltage and draws in continous operation i.e., when the moisture level in the volume stabilized to a low level, just around 2W power.
Due to the membrane being intrinsically hygroscopic, it absorbs humidity if no supply voltage is present. This moisture needs to be discharged on startup and leads to a significantly higher inrush-current that the regular operating current. During startup the supply voltage shall still not drop below 2V, otherwise moisture discharge is not possible or significantly delayed. Suitable current supplies are fold-back current limiting sources, which regulate the output current further down than pure constant current sources and hence maintain a certain output voltage. We provide suitable USB-C voltage regulator modules with fold-back current limiting, which can be used stand-alone or mounted into our 3D-print mounting frame/covers.
Technical Parameters M-3M1R
| Applicable Volume | ~0.350m³ |
| Dehumidifying Performance | 2.9g/day |
| Supply Voltage | 2.9-3.3VDC |
| Power Consumption | 2W (20°C/60%rH) |
| Rated Current | 900mA (dep. of rH) |
| Inrush Current | 7A |
| Operating Temperature | -10°C - +50°C |
| Connecting Type | Solder |
Further Information
Scope of Delivery
The Rosahl M-3M1R dehumidifier comes as single unit with gasket.Complete Kits
Full kits with the M-3M1R membrane, VREG2 USB-C power supply module and assembly material is available as well for either inside membrane mounting or outside of a box.Manufacturer Information
RYOSAI TECHNICA CO., LTD., 8-1-1 Tsukaguchi-Honmachi, Amagasaki-City, Hyogo, 661-0001 Japan, Email: ryosai_sales@ryoyo.co.jp
Recommended products:
This product is compatible with:
Customers who bought this product also bought the following products:
This Product was added to our catalogue on 04/04/2024.
Micro-Dehumidifer Modules »
More information on your personal page »
You can pay with PayPal/PayPal-Express or advance bank transfer. Companies and institutions in Germany can also order against open invoice.