Rosahl Dehumidifier Membranes

Rosahl is a unique electric micro-dehumidifier for enclosures where maintenance-free drying is an important factor. It uses a solid polymer membrane (SPE) installed in a flat panel. A range of membrane sizes is available for enclosures volumes from one litre up to 4m³ (140 cu ft.) in volume.

Operation

Rosahl dehumidifiers work by electrolysis when supplied from a suitable 3V D.C. power supply. They act like an ionic pump to remove water vapour at a molecular level, without involving liquid water.

Importantly, no liquid water means no cleaning, no draining and no maintenance. With low running costs, they are suitable for use in remote locations, and where a conventional dehumidifier is difficult to maintain or to service.

Applications

Ryosai Technica (part of Mitsubishi Electric group of companies) developed and manufacture the Rosahl portfolio. It was in response to demand for compact and maintenance free air-drying solutions to protect sensitive equipment from moisture damage.

Applications range from storage areas for sensitive equipment through to challenging or remote external environments, and many other uses. Rosahl is a low energy moisture extraction system and has a low capacity relative to larger conventional (condensing) dehumidifiers. The process does not involve liquid water. So, unlike condensing humidifiers, they require no cleaning or draining: unlike silica gel, they do not require regular recharging or replacement.

ROSAHL products consume very little energy compared to other types of humidification. This means they will run 24 hours a day, 365 days a year, continuously extracting moisture from an enclosed area without incurring major energy costs. Because they are maintenance free, they will continue working for years without concern. This means no servicing and lower cost of ownership (TCO).

Rosahl membranes fit a wide variety of applications and environments from -20° to +50° C

Benefits

ROSAHL dehumidifiers are:

  • Silent and vibration free so they can be used virtually anywhere
  • Maintenance free to reduce lifetime operating costs
  • Drain-less, so no water removal or cleaning is required
  • Ultra-compact, devices will fit almost any enclosure
  • Environmentally friendly design with low power consumption
  • Long operating life
  • Available also for use as humidifiers or for balancing precious environments
  • Suitable for remote locations and where servicing is difficult or expensive

Membrane Products

PD2

Technical Parameters

Applicable Volume2000cm³ (2l)
Dehumidifying Performance84mg/day
Supply Voltage2.9-3.3VDC
Power Consumption80mW (20°C/60%rH)
Rated Current50mA (dep. of rH)
Inrush Current500mA
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

 
Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current500mA
Current RegulationFold-Back Current Limiting
Dimensions13mm x 25mm x 3.9mm
ConnectionSolder Pads

RD3

Technical Parameters

Applicable Volume2000cm³ (2l)
Dehumidifying Performance84mg/day
Supply Voltage2.9-3.3VDC
Power Consumption80mW (20°C/60%rH)
Rated Current50mA (dep. of rH)
Inrush Current500mA
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

 
Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current500mA
Current RegulationFold-Back Current Limiting
Dimensions13mm x 25mm x 3.9mm
ConnectionSolder Pads

RD4

Technical Parameters

Applicable Volume2000cm³ (2l)
Dehumidifying Performance84mg/day
Supply Voltage2.9-3.3VDC
Power Consumption80mW (20°C/60%rH)
Rated Current50mA (dep. of rH)
Inrush Current500mA
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

 
Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current500mA
Current RegulationFold-Back Current Limiting
Dimensions13mm x 25mm x 3.9mm
ConnectionSolder Pads

RS1

Technical Parameters

Applicable Volume5000cm³ (5l)
Dehumidifying Performance210mg/day
Supply Voltage2.9-3.3VDC
Power Consumption220mW (20°C/60%rH)
Rated Current105mA (dep. of rH)
Inrush Current1.8A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

 
Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current500mA
Current RegulationFold-Back Current Limiting
Dimensions13mm x 25mm x 3.9mm
ConnectionSolder Pads

M-1J1R

Technical Parameters

Applicable Volume~0,125m³
Dehumidifying Performance1g/day
Supply Voltage2.9-3.3VDC
Power Consumption1W (20°C/60%rH)
Rated Current350mA (dep. of rH)
Inrush Current4.5A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current3000mA
Current RegulationFold-Back Current Limiting
Dimensions16mm x 25mm x 3.9mm
ConnectionSolder Pads

M-2J1R

Technical Parameters

Applicable Volume~0,250m³
Dehumidifying Performance2g/day
Supply Voltage2.9-3.3VDC
Power Consumption1.5W (20°C/60%rH)
Rated Current500mA (dep. of rH)
Inrush Current5A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder
 

Power Supply Module

Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current3000mA
Current RegulationFold-Back Current Limiting
Dimensions16mm x 25mm x 3.9mm
ConnectionSolder Pads

M-3M1R

Technical Parameters

Applicable Volume~0,350m³
Dehumidifying Performance2.9g/day
Supply Voltage2.9-3.3VDC
Power Consumption2W (20°C/60%rH)
Rated Current900mA (dep. of rH)
Inrush Current7A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current3000mA
Current RegulationFold-Back Current Limiting
Dimensions16mm x 25mm x 3.9mm
ConnectionSolder Pads

M-3J1R

Technical Parameters

Applicable Volume~0,500m³
Dehumidifying Performance4g/day
Supply Voltage2.9-3.3VDC
Power Consumption2W (20°C/60%rH)
Rated Current900mA (dep. of rH)
Inrush Current7A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current3000mA
Current RegulationFold-Back Current Limiting
Dimensions16mm x 25mm x 3.9mm
ConnectionSolder Pads

MDL-3

Technical Parameters

Applicable Volume~0,500m³
Dehumidifying Performance4g/day
Supply Voltage2.9-3.3VDC
Power Consumption2W (20°C/60%rH)
Rated Current900mA (dep. of rH)
Inrush Current7A
Operating Temperature-10°C - +50°C
Connecting TypePush-Connector/Solder

Power Supply Module

Input VoltageUSB-C 5V DC
Output Voltage3V DC
Rated Current3000mA
Current RegulationFold-Back Current Limiting
Dimensions16mm x 25mm x 3.9mm
ConnectionSolder Pads