Order No.: idwarf-box-1.2
Availability: out of stock

Price:  48.69 EUR

incl. VAT excl. shipping

Questions on this product?

Use our Skype-Chat or enter your question and email address in the field below.

Programmable 2.4GHz Radio Base Station with AVR ATmega128.

iDwaRF-BOX V1.2 Radio Base Station

iDwaRF-BaseStation - Programmable 2.4GHz Radio Base Station with AVR ATmega128.


The iDwaRF-Box expands the iDwaRF family by a powerful Hub module for wireless sensor networks with many sensors (255 sensors with the current iDwaRF-Net firmware version). The module is based on the same radio chip like the iDwaRF-168 module and provides an ATmega128 processor with 128kB flash and external 32kB SRAM memory, as well as a USB interface and a connector for an external antenna. See Infosheet for details.


The iDwaRF-Box provides an ATmega128 processor with 32k external SRAM, voltage regulator, USB interface, radio chip with external antenna connector (SMA), sd-card header (e.g. for wireless data logger applications), two push buttons and one LED. Optionally a Lantronix XPort can be mounted for simple ethernet connectivity.

You can find further information in the Infosheet.


  • Cypress CYWUSB6935 DSSS radio transceiver (WirelessUSB-LR)
  • non-licensed ISM band (2.4GHz - 2.483GHz), can be used world wide
  • -95dBm receiver sensitivity, 0dBm output power
  • Reverse-SMA connector for external 2.4GHz (e.g. WLAN, Bluetooth) antenna
  • +50m
  • Range up to 62.5kBit/s
  • bidirectional, Modul can both send and receive
  • Atmel AVR ATmega128 with external 32k SRAM
  • free N:1 wireless network software as C-library for hub and sensors
  • CP2102 USB-UART converter at UART0
  • standard Atmel ISP 6-pin
  • standard sd-card header
  • optional Lantronix XPort at UART1
  • 3.3V LDO regulator onboard, externally or USB bus powered
  • connectors: 2-pin power plug (RM3.5), standard USB-B connector, reverse-SMA connector, ISP header, optionally RJ45 ethernet (XPort)
  • size 67.3x64.5mm

Scope of Delivery

The iDwaRF-Box comes as fully SMD assembled module. The required leaded components (connectors, buttons, etc., except XPort!) are included as components kit and can be re-assembled upon demand.


Die frei verfügbare iDwaRF-Net Firmware bietet die komplette Funktionalität für ein drahtloses, sternförmiges N:1 Sensornetzwerk. Das Protokoll ist komplett gekapselt, die ‹bertragung von Daten erfolgt zwischen Host (z.B. PC) und iDwaRF Hub über ein einfaches serielles ASCII Protokoll. In den iDwaRF Sensoren können User-Funktionen eingebunden werden und der Datenaustausch erfolgt hier über einfache Datenfelder. Verschiedene Beispielapplikationen, z.B. für die onboard Komponenten des iDwaRF-NodeBoards oder ein drahtloser Chat via Terminalprogramm, können leicht an eigene Anwendungen angepasst werden.


For operating the iDwaRF-Box an external antenna (see below) is required, which has to be ordered separately. For PC connectivity a USB A-B cable is required, or an RJ45 ethernet cable for Ethernet operation. For programming the iDwaRF-BOX an ISP adapter with low-voltage target support is required.



  • Infosheet
  • Schematics
  • Atmel Studio 7 (incl. Toolchain + Software Framework)
  • CodeVisionAVR C Compiler
  • We also recommend:

    iDwaRF-328 V1.2

    Programmable 2.4GHz Radio Module with AVR ATmega328P.

    Price: 24.32 EUR(*)

    Price: 0.00 EUR(*)


    ISP, PDI, JTAG Programmer Debugger for AVR ATmega, Xmega and SAM ARM Cortex-M.

    Price: 94.55 EUR(*)

    (*) Prices incl. VAT excl. shipping.

    IoT Wireless


    We ship world wide with German Post and DHL.

    Shipment with Deutsche Post and DHL.

    Free shipping above €100 order value (only Germany).
    More information.


    PayPal, Wire Transfer. Companies / Institutions in Germany also Invoice. More on this.

    Logo 'PayPal empfohlen'


    Wir sind Mitglied im Händlerbund. Erfahren Sie hier mehr darüber.

    Mitglied im Händlerbund

    AVR Consultant

    chip45.com is official Atmel AVR Consultant since 2003!


    Hinweise zur Batterie Entsorgung.