Questions on this product?
Use our Skype-Chat or enter your question and email address in the field below.
Atmel/Microchip SAM C21 microcontroller module with USB, CAN - Duet3D bootloader.
Sammy-C21 V1.0 Duet3D Module
This is the Duet3D version of the Sammy-C21 module with preloaded Duet3D bootloader.
Sammy-C21 V1.0 is a versatile and very compact/small (just 18x38mm size!) microcontroller board with the SAMC21G18A microcontroller, CP2102 USB UART converter and two CAN2.0/CAN-FD standard compatible CAN bus transceiver. All relevant controller signals are available on pin headers. 16MHz XTAL and 32768Hz TOSC watch crystal are included.
The Atmel/Microchip SAM C series of 5V Cortex M0+ devices is designed for industrial and commercial applications in noisy environments. These products feature robust communications peripherals including the SERCOM module and CAN-FD, along with advanced motor control peripherals, and the Peripheral Touch Control (PTC) for developing robust user interfaces.
The microcontroller module is shipped without preassembled pin headers, since everybody has different preferences or requirements. A Connector Kit with a suitable set of pin headers and receptacles can be ordered optionally.
You can find further information in the Infosheet.
Technical Details of the SAM C21 Board
- ARM Cortex-M0+ based MCU running up to 48MHz
- 256KB embedded Flash and 32KB SRAM
- 2.7V to 5.5V operating voltage
- Controller Area Network (CAN) interface supporting CAN-FD 1.0
- DMA and Event system
- Up to eight flexible serial communication modules (SERCOM)
- 12-bit ADC
- 16-bit Sigma-Delta ADC (SDADC)
- Temperature sensor
- Divide and square root accelerator (DIVAS)
- Hardware touch support with the Peripheral Touch Controller
- 16MHz XTAL and 32768Hz TOSC watch crystal
- 3.3V LDO voltage regulator
- Dual CAN2.0/CAN-FD standard compatible CAN bus transceivers
- 16MHz XTAL crystal and 32768Hz TOSC watch crystal
- Connectors: 2x 32-pin with all processor signals and CAN bus, 1x 8-pin with USB and RS232 Signalen, 1x 6-pin ISP, mini USB-B (5-pin)
- 2.54mm (1/10inch) pin spacing
- Size: 17.78mm x 38.1mm
- Preloaded Duet3D Bootloader.
We also recommend:
5V/3.3V/2.5V 500mA Step Down Switching Regulator Converter Module with LM2674.
Price: 9.90 EUR(*)
We ship world wide with German Post and DHL.
Free shipping above €100 order value (only Germany).
PayPal, Wire Transfer. Companies / Institutions in Germany also Invoice. More on this.
Wir sind Mitglied im Händlerbund. Erfahren Sie hier mehr darüber.
© chip45 - Dr. Erik Lins - Entwicklung und Vertrieb von Hard- und Software. | Design: HTML5 UP